The manufacturing of GMRG

The "VPT" LLC is the leading enterprise that produces GMRG. The firm offers its clients more than 900 kinds of products. There are four manufacturing blocks and over 600 workers there. The enterprise uses only up-to-date technologies according to all European quality standards.

 

Product сatalog

 1. Plain rubber sleeves reinforced with a thread (state standard 10362-76)

They are used for pressure feed of water, lubricating liquids, diesel oil, solid oil, inorganic acids weak liquid, motor petrol, jet engine fuel, antifreezing cooling fluid, aviation petrol, petroleum-based oil, alkalis (up to 20%), except nitric acid.

Бездорновые рукава:

Дорновые рукава:

These flexible conduits are made for the pressure feed of air, inert gas, different fluids. The safety factor for liquid operating environment is 3P, and for air and other gases is 5P.

rez1rez2

The sleeves are operable in areas with a moderate, tropical or frigid climate under temperature of -50 up to + 90 degrees centigrade.

The example:

A sleeve 20x29-1,6, State Standard 10362-76
20 mm – the inner diameter
29 mm – the outer diameter
1,6 – the operating pressure MPa

Operating environment Operating environment, °C Operating pressure, MPa
aviation petrol / motor petrol - 50 up to 70 0,63; 1,0 1,6
jet engine fuel / diesel oil - 50 up to 70 0,63; 1,0 1,6
petroleum-based oils up to 100 0,63; 1,0 1,6
lubricating liquids, solid oil - 50 up to 100 0,63
water up to 120 0,098
antifreezing cooling fluid - 60 up to 120 1,6
1,47
inorganic acids weak liquid, alkalis (up to 20%), except nitric acid - 50 up to 50 1,6
0,63; 1,0;1,6
air, inert gases - 50 up to 60 0,63; 1,0
liquid or gas operating environment   2,94
0,29
1,47
2,45

 2. Sleeves for gas welding and metal cutting (state standard 9356-75)

They are destined for the pressure feed of such substances as:

the first category: acetylene, propane, butane under pressure 0,63 MPa.
the second category: liquid fuel such as petrol а-72, white spirit, kerosene under pressure 0,63 MPa.
the third category: oxygen under pressure 2 MPa and 4 MPa.

Operating temperature:

From -35°С up to +70°С – for a moderate and tropical climate
From -55°С up to +70°С – for a frigid climate
The safety factor is 3P.

The category The inner diameter, mm The outer diameter, mm The operating pressure. MPa The sleeve length, m
I 6,3 13 0,63 50
I 9,0 18 0,63 50
I 12 22 0,63 50
II 6,3 13 0,63 50
II 8,0 16 0,63 50
II 9,0 18 0,63 50
II 10,0 19 0,63 50
II 12,0 22 0,63 50
III 6,3 13 2,0 50
III 9,0 18 2,0 50
III 12,0 22 2,0 50
III 16,0 26 2,0 50

 3. The rubber long-length and light-weight hoses reinforced with a thread (technical specifications 2554-002-22465588-2008)

The long-length and light-weight pressure hoses are used as connective flexible tubing for the pressure feed of alkali and acids, inert gases and air, oil products and water. All these technical specifications are compulsory ones and they apply to the hoses prepared for using in the national economy.

 

Operating environment Operating temperature, °C
  in areas with a moderate climate in areas with a tropical climate
Petrol - 45 up to + 70 - 45 up to + 70
Kerosene    
Petroleum-based mineral oil    
Industrial water (without additives) and inorganic acids weak liquid, alkalis (up to 20%), except nitric acid - 35 up to + 70 - 35 up to + 70
Air, carbon-dioxide gas, nitrogen and other inert gases - 45 up to + 70 - 45 up to + 70
Hot water - 35 up to + 70 - 35 up to + 70

 4. Curved hoses of radiator engine cooling systems (technical specifications 2556-001-22465588-2008)

These hoses are made for transmission of cooling fluid such as water or antifreeze. The clad hoses are right for using in areas with a moderate or tropical climate with different humidity and under the temperature of – 50 up to + 90 °C.

6

The hoses can be of two types:

I Ones with a lining
II Braided ones

При заказе в документации указываются с использованием условных обозначений, пример: I 4320-1303010 ТУ 2556-001-22465588-2008, где
I – тип шланга (прокладочный);
4320-1303010 – номер чертежа шланга.

Operating environment Operating environment temperature in areas with a tropical or moderate climate, °C
antifreezing cooling fluid - 45 up to + 120
water up to + 120

 5. Molded GMRG

The molded general mechanical rubber goods are used in passenger, motor, farm transport. The products can be made according to client’s drafts.

Call us +7 (8443) 34-22-20 and we shall answer all your questions.